Production Document

Mixmode Tech Rider

DJ + Live Electric Guitar

This is a high-energy EDM show. Preferred setup for the strongest possible show.

Production is essential. Mixmode is an EDM performance built around drops. Lights, a large stage, and big effects (lasers, haze, strobes, CO2) are not decoration - they are part of the show. A strong PA plus active lighting and FX is the difference between a DJ set and a concert moment.

Flexible. If something is unavailable, send us your production specs and we can adapt.

Send Production Specs Contact booking

01 / Specs

Quick specs.

Pioneer XDJ-RX3

Preferred
Also okay: XDJ-AZ or CDJ-3000 setup

Stage

20' x 12'+

Recommended minimum 16' x 10'
Can adapt smaller with advance notice

DJ Table

6' wide

5' minimum
Room to walk in front and around both sides

Guitar

Line 6 stereo XLR out

2 XLR inputs to FOH
Can route through DJ mixer if no engineer

Mic

Wireless handheld

Preferred
Wired okay

Monitors

2 DJ + 1 guitar

DJ: mixer BOOTH OUT → L/R booth monitors
Guitar: 1 wedge monitor downstage right
Jordan controls booth level from the mixer

02 / Stage

Sample stage layout.

Sample layout only - adaptable to your room. Mixmode needs open performance space and should read as one unified act.

Sample diagram

Back / Above

Lighting / Lasers / LED / FX

Walking clearance

DJ Booth

Center Stage

Walking clearance

Monitor 1

DJ - Booth Out L

5-8 ft open movement space

Monitor 2

DJ - Booth Out R

Open downstage / crowd sightlines

Guitar

Downstage Right

Guitar wedge monitor

Front of Stage / Crowd

Sample only - orientation shown from the audience point of view

03 / Sound

Sound.

Professional PA

Strong subs

Clean mains

Adequate headroom

Balanced room coverage

04 / Lighting + FX

Make the drops feel big.

EDM show - lighting and FX are essential, not optional. Program the rig to the music and run it live with the set.

01Lasers
02Moving heads
03Strobes
04Backlighting
05Crowd sweeps
06Haze
07Cryo / CO2
08Fog
09LED wall

Builds

Increase intensity.

Drops

Maximum impact.

Breakdowns

Contrast.

Avoid static lighting all night.

Lasers

Strongly preferred when safely available.

Haze

Strongly preferred for beams and lasers.

Cryo / CO2 / Fog

Use on major drops when available.

Keep FX equipment out of performer walking paths.

05 / Visuals

LED wall / visuals.

If an LED wall is available

Mixmode can provide visuals.

Production should send

Resolution
Aspect ratio
Pixel dimensions
Playback system

06 / Priorities

Production priority.

01Strong PA + subs
02Lasers
03Moving lights
04Strobes
05Haze
06Cryo / CO2 / Fog
07LED wall

Fewer high-impact elements used well > lots of mediocre production.

Send us your production specs.

Send Production Specs Contact Mixmode